Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar, The product will supply to all over the world, such as: , , ,
READ this !!! sorry about the audio ….attn:will not work on multiple grill or screen intake AKA Volute screen intake you need the same intake you see on the video.this pump is 750watts if you run 24/7 you go broke but any way i already bought small one @ebay 150watts and run like almost the same …. male adapter,valve from home depot, bigger sump pump handles more water more air can produce…
“NEW INVENTION” 3 in 1 water circulation, aeration/oxygen,protein skimmer my next project ….
…………….why mine not sucking air?………………..
problem:
a…you drill to big for tube connection / water still passing through…
fixed:
b… use teflon tape / silicon around the bolt thread
problem:
a…you drill to close to water outtake
fixed:
b…check the propeller turns / opposite side
multiple grills intake –not going to work..period
By from -
By from -
