Short Lead Time for PTFE Gasket to South Africa Manufacturers
Short Lead Time for PTFE Gasket to South Africa Manufacturers Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Short Lead Time for PTFE Gasket to South Africa Manufacturers, The product will supply to all over the world, such as: , , ,
The aim of tightening a compression joint is to create a gas tight joint without compressing the olive too tight on the pipe by over tightening the nut as this will restrict flow through the pipe as the pipe will have been made internally smaller.
GAS IT and FES Autogas Ltd do not accept any liability from users following this video or information we provide.
We highly recommend getting a GAS IT Trained Dealer or Qualified Gas engineer to check your installation and fitment of GAS IT parts prior to filling and using it with LPG/ Autogas.
By from -
By from -
