High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer, The product will supply to all over the world, such as: , , ,
https://www.classicfilters.com/product/ptfe-membrane-housings/ •
One of our most innovative filtration solutions, Classic Filters’ hydrophobic PTFE membranes and housings are perfectly suited for separating liquid from gas molecules, allowing a pure gas sample to be produced for the protection of analysers and other instruments.
A porous PTFE membrane is supported by a sintered, porous stainless steel disc on the outlet side to increase the strength of the membrane and give a higher differential pressure. Two liquid phases can also be separated if required.
Classic Filters now also offers a new hydrophobic/oleophobic membrane, designed to remove both water and oils from a gas stream.
Permalink: https://youtu.be/Ve6oXIACT4w
By from -
By from -
