High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
High Efficiency Factory PTFE Graphite Packing with Aramid Corner to Bangalore Manufacturer, The product will supply to all over the world, such as: , , ,
On a Waukesha Pump, any seal change requires removal of the pump from the pipeline and a lot of downtime – watch this video and see how a drop-in replacement Revolution pump can radically cut your maintenance time and costs with in-line, front-loading O-Ring Seal Changes. The Revolution Pump is available from BestPump and will revolutionise your engineering and production workflows.
Revolution pumps operate on the same rotary piston principle as Waukesha U1, U2 pumps, are interchangeable, offer the same flow rates but bring so many benefits you cannot afford to overlook this 21st century pump design.
By from -
By from -
