Renewable Design for PTFE Packing with Aramid Corner Wholesale to British
Renewable Design for PTFE Packing with Aramid Corner Wholesale to British Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Renewable Design for PTFE Packing with Aramid Corner Wholesale to British, The product will supply to all over the world, such as: , , ,
Visit https://www.smartplumbingproducts.com/product/insta-clamp-repair-clamp to learn more.
The Insta-Clamp Repair Clamp provides a quick and easy way to temporarily patch a leaky pipe. Available in 2 sizes, the clamp prevents having to drain the system and eliminates shutdown. Insta-Clamp provides quick seal on all M, L or K copper tubing solder joints and can make a permanent or temporary repair on 45s, 90s, Tees, Couplings and Threaded Adapters. The 60% pipe side of the waffle gasket can also be used for pin hole leaks.
Features and Benefits:
Available in .5″ to 2.5″ and 3″ – 4″ diameters (Insta-Clamp Plus)
Made from 304 Stainless Steel
Unique NBR STEP waffle gasket design
Temp rating: -40o to 2120 F
Pressure Rating: Insta-Clamp ½”-2-1/2″ – 150 psi
Pressure Reating: Insta-Clamp Plus 3.00″-4.00″ – 175 psi
Exact Fit – Simple two piece design
For permanent or temporary repairs
Produced in the USA
By from -
By from -