Good Quality PTFE O RING for Sydney Manufacturers
Good Quality PTFE O RING for Sydney Manufacturers Detail:
PTFE o-rings are produced with 100% Virgin PTFE or filled PTFE,and fabricated to extremely close tolerances and to the highest industry and military specifications. It is resistant to most chemicals including acids, bases, oils, steam and other chemicals. It is also very tough and abrasive resistant.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.1~2.3 |
| Tensile Strength | Mpa | 15.0 |
| Elongation at Break | % | 150 |
Application Area
- Agricultural, pumps, mining
- Rail and transport use, Wheels
- General engineering applications
- Marine, Shipping, Automotive
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket
Good Quality PTFE O RING for Sydney Manufacturers, The product will supply to all over the world, such as: , , ,
Visit https://www.smartplumbingproducts.com/product/insta-clamp-repair-clamp to learn more.
The Insta-Clamp Repair Clamp provides a quick and easy way to temporarily patch a leaky pipe. Available in 2 sizes, the clamp prevents having to drain the system and eliminates shutdown. Insta-Clamp provides quick seal on all M, L or K copper tubing solder joints and can make a permanent or temporary repair on 45s, 90s, Tees, Couplings and Threaded Adapters. The 60% pipe side of the waffle gasket can also be used for pin hole leaks.
Features and Benefits:
Available in .5″ to 2.5″ and 3″ – 4″ diameters (Insta-Clamp Plus)
Made from 304 Stainless Steel
Unique NBR STEP waffle gasket design
Temp rating: -40o to 2120 F
Pressure Rating: Insta-Clamp ½”-2-1/2″ – 150 psi
Pressure Reating: Insta-Clamp Plus 3.00″-4.00″ – 175 psi
Exact Fit – Simple two piece design
For permanent or temporary repairs
Produced in the USA
By from -
By from -
