Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia
Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Popular Design for PTFE Graphite Packing with Aramid Corner Supply to Latvia, The product will supply to all over the world, such as: , , ,
AIB Vietnam – Chuyên cung cấp seal, gasket cho thiết bị trao đổi nhiệt dạng tấm – Seal, gasket cho thiet bi trao doi nhiet dang tam – Liên hệ: Mr. Duy Anh – Tel: …
LIQUI MOLY Pro-Line Engine Flush (#2427)
Cleans the engine from the inside. Removes deposits from lubrication holes, oil screens, piston ring zone, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle’s reliability. Allows the fresh oil to develop its full performance after an oil change.
Intended use:
Suitable for all petrol and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Motor cleaning before an oil change. 500 ml sufficient for up to 5 l oil volume.
More information: https://www.liqui-moly.de/liquimoly/produktdb.nsf/id/en_2427.html?OpenDocument&land=GB&voilalang=e&voiladb=web.nsf
By from -
By from -
