Good User Reputation for PTFE Graphite Braided Packing for Mexico Manufacturers
Good User Reputation for PTFE Graphite Braided Packing for Mexico Manufacturers Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:

Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket
Good User Reputation for PTFE Graphite Braided Packing for Mexico Manufacturers, The product will supply to all over the world, such as: , , ,
How to re-caulk a inground pool deck. Removing the old caulk, I used a 5-1 painters knife. The backer rod/ caulk saver foam was from Lowes (in the weather strip area) and the size I used was 5/8″ (will vary based on crack size) . The caulk also came from Lowes in the concrete section. Some small areas did leak through causing a hole or gap. the next day I skimmed a little latex caulk over the hole then after it dried added another coat of the self leveling caulk to cover the latex caulk.

