Factory Supplier for Aflas O-Ring to Spain Manufacturer
Factory Supplier for Aflas O-Ring to Spain Manufacturer Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
| Properties | Units | Typical value |
| Hardness | IRHD | 84 |
| Tensile strength | MPa | 22 |
| Elongation at break | % | 189 |
| Modulus at50% elongation | MPa | 4 |
| Modulus at100% elongation | MPa | 12 |
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
Factory Supplier for Aflas O-Ring to Spain Manufacturer, The product will supply to all over the world, such as: , , ,
Just a simple fix I came up with the end the factory built in leak on the drive side of a 4 speed transmission.
Thanks to TBear for the T shirt.
Here’s the link to the drawing in .pdf format. Its not to scale but its pretty straight forward.
https://www.celticthunder.net/TransSeal.pdf
Here’s the O-rings I got from McMaster Carr.
https://www.mcmaster.com/#9464k291/=eaxx08
saddlebagrail from Shovelhead.us is now selling these on eBay.
They are $53 and well worth it.
https://www.ebay.com/usr/saddlebagrail?_trksid=p2047675.l2559
The story of this build,
https://www.celticthunder.net
By from -
By from -
