Original Factory PTFE O RING for Panama Manufacturer
Original Factory PTFE O RING for Panama Manufacturer Detail:
PTFE o-rings are produced with 100% Virgin PTFE or filled PTFE,and fabricated to extremely close tolerances and to the highest industry and military specifications. It is resistant to most chemicals including acids, bases, oils, steam and other chemicals. It is also very tough and abrasive resistant.
Technical Data Sheet
Property | Unit | Result |
Density | g/cm3 | 2.1~2.3 |
Tensile Strength | Mpa | 15.0 |
Elongation at Break | % | 150 |
Application Area
- Agricultural, pumps, mining
- Rail and transport use, Wheels
- General engineering applications
- Marine, Shipping, Automotive
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Original Factory PTFE O RING for Panama Manufacturer, The product will supply to all over the world, such as: , , ,
Loading of the internal diameter on a press fitting. The design of the tool was made by Camas. Possibility to process 8 different sizes from ø12 up to ø54 mm. The machine is able to process 1 piece every 3 seconds. The machine is completely automatic.
By from -
By from -