2017 wholesale price Expanded PTFE Tape to Slovakia Factory

Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.

Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.

Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.

l Easy use and replacement

l Wide service scope.

Technical Data Sheet

Regular Size

Application Area

It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.

UHV viewports Conflat, ISO or KF sales@dmphotonics.com

Del Mar Photonics offer a range of competitively priced UHV viewports , Conflat, ISO or KF including a variety of coatings to enhance performance.
When you send us your inquiry please fill out the following form to indicate all important specifications and e-mail it to us with your inquiry.

Del Mar Photonics viewports are manufactured using advanced techniques for control of special and critical processes, including 100 percent helium leak testing and x-ray measurements for metallization control.

https://www.dmphotonics.com/Zinc-selenide-ZnSe-vacuum-viewport/vacuum-viewports-ZnSe.htm

Windows Materials include:
Fused silica, Quartz , Sapphire , MgF2, BaF2, CaF2, ZnSe, ZnS, Ge, Si, Pyrex

Coating – a range of custom coatings can applied – which include
- Single QWOT
- Broad Band AR
- V coatings
- ITO
- DLC (Diamond like coating)

A vacuum flange is a flange at the end of a tube used to connect vacuum chambers, tubing and vacuum pumps to each other. Vacuum flanges are used for scientific and industrial applications to allow various pieces of equipment to interact via physical connections and for vacuum maintenance, monitoring, and manipulation from outside a vacuum’s chamber. Several flange standards exist with differences in ultimate attainable pressure, size, and ease of attachment.

Vacuum flange types

KF/QF

A KF-25 tee, o-ring, and clamp.
The ISO standard quick release flange is known by the names Quick Flange (QF), Klein Flange (KF) or NW, sometimes also as DN. The KF designation has been adopted by ISO, DIN, and Pneurop. KF flanges are made with a chamfered back surface that are attached with a circular clamp and an elastomeric o-ring that is mounted in a metal centering ring. Standard sizes are indicated by the nominal inner diameter in millimeters for flanges 10 through 50 mm in diameter.

DN10KF
DN16KF
DN25KF
DN40KF
DN50KF

ISO
The ISO large flange standard is known as LF, LFB, MF or sometimes just ISO flange. As in KF-flanges, the flanges are joined by a centering ring and an elastomeric o-ring. An extra spring-loaded circular clamp is often used around the large diameter o-rings to prevent them from rolling off from the centering ring during mounting.

The ISO large flanges come in two varieties. The ISO-K (or ISO LF) flanges are joined with double claw clamps which clamp to a circular groove on the tubing side of the flange. The ISO-F (or ISO LFB) flanges have holes for attaching the two flanges with bolts. Two tubes with ISO-K and ISO-F flanges can be joined together by clamping the ISO-K side with single claw clamps which are then bolted to the holes on the ISO-F side.

ISO large flanges are available in sizes from 63 to 500 mm nominal tube diameter).[2]

DN63LF (63.5 mm)
DN100LF (102 mm)
DN160LF (160 mm)
DN200LF (200 mm)
DN250LF (254 mm)
DN320LF (316 mm)
DN400LF (400 mm)
DN500LF (500 mm)

CF (Conflat)

A 2¾ CF (conflat) full nipple with blank and OFHC copper gasket.

A 60 kV high voltage electrical feedthrough on a 4½ inch (or DN63) conflat flange
Several vacuum flange standards exist, and the same flange types are called by different names by different manufacturers and standards organizations. CF (ConFlat) flanges use a copper gasket and knife-edge flange to achieve an ultrahigh vacuum seal. The term “ConFlat” is a registered trademark of Varian, Inc., so “CF” is commonly used by other flange manufacturers. Each face of the two mating CF flanges has a knife edge which cuts into the softer metal gasket, providing an extremely leak-tight, metal-to-metal seal. Deformation of the metal gasket fills small defects in the flange, allowing Conflat flanges operate down to 10−13 torr (10−11 Pa) pressure. The knife edge is recessed in a groove in each flange. In addition to protecting the knife edge, the groove helps hold the gasket in place, which aligns the two flanges and also reduces gasket expansion during bake-out. For stainless steel conflat flanges baking temperatures of 450°C can be achieved; the temperature is limited by the choice of gasket material. CF flanges are sexless and interchangeable. In North America, flange sizes are given by flange outer diameter in inches while in Europe and Asia, sizes are given by tube inner diameter in millimeters. Despite the different naming conventions, the actual flanges are the same.

Featured applications:

Rotation-induced cooling of an optically-trapped micro-gyroscope in vacuum
Yoshihiko Arita, Michael Mazilu, Kishan Dholakia
6 February 2014 • 5:10 – 5:30 PM | Part of SPIE OPTO

Measurement of Auger effect and droop in LEDs by energy analysis of electron emission in vacuum
Claude Weisbuch, Jim Speck, Justin Iveland, J. Perretti, L. Martinelli, M. Piccardo
6 February 2014 • 9:00 – 9:30 AM | Part of SPIE OPTO