2017 Good Quality FEP Encapsulated O-Ring for Germany Manufacturer
2017 Good Quality FEP Encapsulated O-Ring for Germany Manufacturer Detail:
Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.
Technical Data Sheet
|
Property |
Unit |
Result |
|||
|
A |
B |
C |
|||
|
Normal Conditions |
Hardness |
JIS Hs |
70~90 |
70~90 |
60~75 |
|
Elongations(min.) |
% |
60 |
60 |
80 |
|
|
Tensile Stress(min) |
Mpa |
16 |
16 |
16 |
|
|
Compressibility |
% |
50~60 |
50~60 |
60~75 |
|
|
Recovery |
% |
＞85 |
＞85 |
＞70 |
|
|
Permanentset |
% |
＜10 |
＜10 |
＜10 |
|
|
230°Cx24h hot air ageing |
Change of hardness(max) |
JIS Hs |
-5~+5 |
-5~+5 |
-5~+5 |
|
Change of Tensile Stress(max) |
% |
-15 |
-15 |
-15 |
|
|
Change of Elongation(max) |
% |
-20 |
-20 |
-20 |
|
|
Compression Permanentset |
175°Cx70h |
% |
≤20 |
≤20 |
≤20 |
|
Color |
|
|
Brown |
Black |
Red |
|
Applications |
Temperature Limited |
℃ |
-20~+250 |
-20~+200 |
-20~+200 |
|
Pressure Limited |
Mpa |
0~35 |
|||
|
Working Environment |
|
Strong Caustics, moderate acids, chlorine, gases, water, steam, hydrocarbons, hydrogen and aluminum fluoride except element fluorine and fusion sodium. |
|||
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
2017 Good Quality FEP Encapsulated O-Ring for Germany Manufacturer, The product will supply to all over the world, such as: , , ,
White Knight PEM050 electronic metering pumps offer adjustable flow rates for use in single-wafer processing tools or premix vessels to ensure exact chemistry mixtures, and allow for in-situ mixing directly at the head.
These stepper-driven pumps accurately dispense 1-50ml of high-purity chemicals in Teflon® (PTFE) fluid paths for chemical replenishing, blending, dosing and spiking applications, as well as cleaning CVD equipment and in photolithography. They are ideal for photoresist, etch and clean processes, peroxide spiking in piranha mixtures, and other blending of chemical mixtures into process tanks prior to the introduction of substrates.
PEM050 pumps feature fully-supported rolling diaphragms, which maximize discharge pressure capabilities. Positive control valves ensure accuracy by eliminating the variability that is typical of check valves. They offer up to 5 discharge ports that can be independently controlled with programmable system logic.
Features & Benefis:
- Electronically-controlled, fully adjustable stroke
- Dispense volume up to 50ml
- Highly accurate; ± 0.01% repeatability
- 60 – 80 PSI capability
- Programmable system logic
- 2 to 6 port configurable
- Safe, leak-free operation with no maintenance
- No exposed metals prevents corrosion and contamination
- Fully-swept Teflon® fluid path for ultra-pure applications
- PTFE rolling diaphragm with PP housing
- Visual position reference for easy setup and monitoring
- Easy to install and service with snap-in/out mount
- Can be installed in any orientation
- Clean room assembly, testing and packaging
- Leak detection port
- Self-priming
- Compact footprint
- Minimal hold-up volume
- Positive inlet/outlet valving prevents flow through
By from -
By from -
