High Quality Industrial Factory PTFE Graphite Braided Packing to Czech Republic Factories
High Quality Industrial Factory PTFE Graphite Braided Packing to Czech Republic Factories Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
15Mpa |
|
Shaft Speed |
14m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
What Is A PTFE Ring Gasket?
High Quality Industrial Factory PTFE Graphite Braided Packing to Czech Republic Factories, The product will supply to all over the world, such as: , , ,
ALL SEALS – THE SEALING SPECIALISTS
Full-line stocking distributor for standard & ready source for non-standard seals & make-to-print rubber parts. Distributor of O-rings, Minnesota quad rings, hydraulic seals, U-cups, piston cups, vee packings, wipers, lathe cuts, Teflon® products, Teflon® spring loaded & Teflon® oil seals, mechanical shaft seals, gaskets, braided packings, bearing guards, sealants, adhesives, lubricants, silicone fluids & greases, RTV’s, UV curing equipment, adhesives & coatings, dispensing equipment & a wide variety of other products in metric sizes. Technical & application assistance is available.
For more technical information, visit our web site at https://www.allsealsinc.com.
Tell us what you want to seal, what conditions and specifications you need to meet, provide us with a print and we’ll custom design the part to meet your specs.
NKG, back to back (shaft seal, MG12-MG1)
Table of contents:
Dismantling:
00:00 Removing the pump housing
02:41 Removing the impeller
04:03 Removing the primary shaft seal
05:15 Removing the secondary shaft seal
Assembly:
06:06 Fitting the secondary shaft seal
08:36 Fitting the primary shaft seal
10:31 Fitting the impeller
11:41 Fitting pump housing
15:04 Wear ring replacement
Recorded: January 2010
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
