Factory Supplier for PTFE Graphite Braided Packing to Cannes Factory
Factory Supplier for PTFE Graphite Braided Packing to Cannes Factory Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Factory Supplier for PTFE Graphite Braided Packing to Cannes Factory, The product will supply to all over the world, such as: , , ,
Spears® Manufacturing installation video for the proper joint make up of threaded PVC fittings using Spears® Blue 75™ Thread Sealant or PTFE tape sealant. Threaded connections require application of a thread sealant that has been tested and approved for use with polyvinyl chloride (PVC), and/or chlorinated polyvinyl chloride (CPVC).
By from -
By from -