Factory Supplier for NBR O-Ring for Sri Lanka Manufacturer

Short Description:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber. Technical Data Sheet Color Black or Color Material Nitrile(NBR) Hardness(Shore A) 65~75 Temperature(℃) -30~+120 Tensile Strength(Mpa) 14 Elongation at Break(%) 384 Density(g/cm3) 1.2   Application Area Nitrile rubber performs well in carburetor and fuel...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Factory Supplier for NBR O-Ring for Sri Lanka Manufacturer Detail:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.

Technical Data Sheet

Color Black or Color
Material Nitrile(NBR)
Hardness(Shore A) 65~75
Temperature(℃) -30~+120
Tensile Strength(Mpa) 14
Elongation at Break(%) 384
Density(g/cm3) 1.2

 

Application Area

Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.


Product detail pictures:

Factory Supplier for
 NBR O-Ring for Sri Lanka Manufacturer detail pictures


Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications

Factory Supplier for NBR O-Ring for Sri Lanka Manufacturer, The product will supply to all over the world, such as: , , ,


  • Can’t find a replacement for that torn ribbon cable; don’t want to pay for a new one – solder splice the two bits – did you save them ?

    PLEASE NOTE: In the making of this video my efforts were necessarily clumsy because I could not take advantage of any magnification directly, especially using the microscope; I had to concentrate on aligning the cam to get a picture, so I was constrained to watching the screen of the VCR, it being too low resolution for productive effort. I would like to have used an eyepiece adaptor that fits both the camcorder and the ‘scope; then I should have been able to peer through the other eyepiece. So be assured it is a great deal easier than I make it look here. I have to admit that relatively few people have access to a stereo microscope; I paid around £180 ( ebay ) for this Russian made Lomo MBC-10, so at least it has been useful apart from being a toy.

    I use a Yihua [ goes under several trade names ] workstation that has a heater blower – like a hair drier but hotter and more concentrated flow of air – and a soldering iron that has, as an accessory, a very fine, needle point bit, allowing you to make a good job of such tiny amounts of solder, almost too small to see with the naked eye.

    The VX1000 mic/remote/cp flexiboard cable is about 1cm wide; with only a “normal” fine point soldering bit 40 joints were made in the space of approx 0.9 sq cm. The much finer bit was/is available as an optional accessory.

    See this video for demonstration of USB microscope: “ToddFun.com: USB Microscope Review”.

    Mario Parodi [ Guitar ] plays:-

    Albeniz: Rumores de la Caleta; SE-Op 165 – Malaguena
    Brahms: Cradle Song Op 49 no 4
    Debussy: Arabesca No 1; SB – Clair de lune


    5 Stars By from -

    5 Stars By from -

    Related Products