High Definition For PTFE Graphite Packing with Aramid Corner to Switzerland Manufacturer

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

https://www.durafix.com.mx Soldar aluminio ahora es mas facil que nunca! desde una lata hasta una placa, solo requieres un soplete de gas propano, mapp, acetileno etc. en segundos podras soldar piezas de aluminio, cobre, bronce, lamina galvanizada.

Durafix, crea una fuerte union mas resistente que el metal base, libre de porosidades y residuos, con ua apariencia similar al aluminio, no requiere fundente ni el uso de gases o maquinas especiales.
============================
Tensile Strength, lbs/sq. in.=47,000
Compression Strengt, lbs/sq. in.=60,000 – 75,000
Shear Strengt, lbs/sq. in.= 34,000
Charpy Impact Str, lbs/sq. in.= 4 ft/lb to break 1/4″ bar
Hardness (Brinell)= 100
Ductility Good= Good
Melting Point= 732°F – 390°C
Specific Gravity = 6.7
Density (lbs/cu. in.)= 0.25
Elongation (in 2″)= 3%
Coefficient of Linear Expansion= 15.4×10-6/°F
Electrical Conductivity= 24.9% of Cu
Thermal Conductivity= 0.24 cal/cu.cm/°C
============================
Entrega inmediata en todo Mexico.

============================
Music track: Adam Michaels Is There Anybody Out There
Powered by Freeplay Music