13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer
13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer, The product will supply to all over the world, such as: , , ,
Teflease MG 2 is a PTFE film coated with a silicone adhesive.
Teflease MG tapes will release from most resin systems. They are ideal for use on tooling blocks and all areas where high elongation and release is needed. Teflease MG tapes will form to critical contours and mold surfaces while offering multiple releases or may be used to cover multiple detail mold seams. They provide a semi-permanent release on cured Airpad tooling rubber and Aircast 3700 pressure intensifiers and mandrels.
Benefits:
• Teflease MG2 provides permanent release and superior surface finish, saving time and improving quality.
• Protect rubber tooling mandrels and intensifiers from resin attack, extending tool life and reducing cost.
• Good elongation makes application to complex shapes easier, reducing time and improving quality.
For more information, please visit: www.airtechonline.com
By from -
By from -
