Wholesale PriceList for Spiral Wound Gasket-CG for Norwegian Factory

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Wholesale PriceList for Spiral Wound Gasket-CG for Norwegian Factory Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

ee

Technical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

 

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

Wholesale PriceList for
 Spiral Wound Gasket-CG for Norwegian Factory detail pictures


Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications

Wholesale PriceList for Spiral Wound Gasket-CG for Norwegian Factory, The product will supply to all over the world, such as: , , ,


  • Warning: This is not a video on distillation, but I still I warn you not to distill flammable solvents in a poorly ventilated area!

    In this video I will be showing you how I went about building my own pot still. The purpose of this video is to give an idea of what goes into making one. Keep in mind that this is my own design and there are bound to be design flaws. There are definitely improvements that can be made.

    This is the pressure cooker that I bought: https://www.amazon.ca/gp/product/B005LG0QF2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00



    CR, CRN 32, 45, 64, 90

    Table of contents:

    Assembly:
    00:00 Pump base
    02:26 Bearing on shaft
    03:31 Chamber stack
    08:09 Pump head
    09:54 Basic unit
    12:16 Shaft seal
    13:47 Motor stool
    15:33 Coupling

    Replacement:
    16:42 Neck ring
    18:19 Bush
    19:19 Impeller ware ring
    20:05 Bottom bearing

    Recorded: Before 2000

    For more information please visit:

    https://www.grundfos.com/service-support.html


    5 Stars By from -

    5 Stars By from -

    Related Products