Factory Wholesale PriceList for Spiral Wound Gasket-RIR to Denver Manufacturers
Factory Wholesale PriceList for Spiral Wound Gasket-RIR to Denver Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Factory Wholesale PriceList for Spiral Wound Gasket-RIR to Denver Manufacturers, The product will supply to all over the world, such as: , , ,
Some outboard motor jobs are more difficult than others however having the correct information is the key regardless of how big the job is. Performance Product Technologies https://www.perfprotech.com not only offers products but also the Technical Information and How-To videos to help you get the job done on your own.
Replacing the Lower Unit Seals on a Mercury Outboard motor requires having the correct tools. This video will show you exactly which tools you’ll need as well as how to do the job correctly.
Motor Diagrams
https://www.perfprotech.com/mercruiser-parts-finder/umodel/16949
Special Tools
https://www.perfprotech.com/mercruiser-parts-finder/tools/assembly/10125/320?umodel=16949
Technical Manuals
https://www.perfprotech.com/mercruiser-parts-finder/servicesupport-material/assembly/10125/0?umodel=16949
Video Timeline
Draining the gear Lube – 0:15 – 0:30
Pressure Testing for Leakage – 0:54 – 1:50
Disassembling the Water Pump – 1:55 – 2:18
Oil Seal Carrier Removal – 2:19 – 2:56
Bearing Carrier Removal – 2:57 – 3:15
Removing the Seals form the Bearing Carrier – 3:17 – 4:15
Installing Bearing Carrier Seals – 4:20 – 6:20
Replacing the Bearing Carrier O-Ring – 6:21 – 7:07
Replacing the Oil Seal Carrier Seals & O-Ring – 7:10 – 8:58
Replacing the Shift Shaft Bushing/Cover Seals, O-Ring & Gasket – 9:00 – 10:20
Reinstalling the Shift Shaft Bushing/Cover – 10:23 – 10:57
Reinstalling the Oil Seal Carrier – 11:00 – 11:14
Reinstalling the Bearing Carrier – 11:16 – 12:42
Reinstall Water Pump – 12:43 – 13:48
Pressure Checking the New Seals – 13:49 – 14:21
Reinstalling the Lower Unit – 14:22 – 15:12
Testing – 15:13
List of Required Sealants – 15:20
List of Required Tools – 15:34
By from -
By from -
