Factory supplied PTFE Graphite Braided Packing Supply to Norwegian
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
15Mpa |
|
Shaft Speed |
14m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian, The product will supply to all over the world, such as: , , ,
The SSI / GRANOR XJS® Expansion Joint System is a revolutionary new concept in expansion joint construction and rehabilitation, combining a tough, impact resistant wear resistant polymer joint nosing and a rapid two part cure joint sealing system with high movement capacity. The total expansion joint system, which is cold applied with minimum specialised equipment, is specifically designed to provide a watertight, chemically resistant seal to accommodate high traffic loads and to remain pliable in cold and warm temperatures.
By from -
By from -
