Top Suppliers Spiral Wound Gasket-R for Kuala Lumpur Factories

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Top Suppliers Spiral Wound Gasket-R for Kuala Lumpur Factories Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

gg

echnical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

 Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

Top Suppliers
 Spiral Wound Gasket-R for Kuala Lumpur Factories detail pictures


Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket

Top Suppliers Spiral Wound Gasket-R for Kuala Lumpur Factories, The product will supply to all over the world, such as: , , ,


  • The Breadsticks machine GR 15, is a machine for the production of breadsticks.All surfaces in contact with the dough are in Inox or Teflon. The cut of dough is carried out by manual control. Output can achieve 25 kg per hour. Die are easily interchangeable with the only intervention on two knobs. The machine consists of the following basic units:

    Structure: in assembled sheet which supports all the other units.
    Die:with interchangeable rollers. Unloading belt:mobile.
    Electric system: it is placed on the panel under the control buttons, it is enclosed in the structure itself of the machine, it encloses the control and power circuits

    www.scledensi.com


    5 Stars By from -

    5 Stars By from -

    Related Products