Goods high definition for Spiral Wound Gasket-CGI to Zambia Manufacturers
Goods high definition for Spiral Wound Gasket-CGI to Zambia Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Goods high definition for Spiral Wound Gasket-CGI to Zambia Manufacturers, The product will supply to all over the world, such as: , , ,
Following Alu rolling mill for sale
Used Aluminium Foil Mill
- Manufacturer Achenbach, Germany
- Manufacture year 1986
- Material Aluminium foil
- Entry thickness Max. 0.4 mm
- Exit thickness Min. 2*0.006 mm
- Strip width Max. 1,450 mm
Min. 800 mm
- Coil weight Max. 6,300 kg
- Spool dimension Dia. 400*1,700 mm
Dia. 279*1,245 mm
- Exit coil dia. Dia. 400/1,485 mm
- Roiling speed 0 – 800/1,500 m/min.
- Roiling force Max. 5,000 kN
- Back-up roll bearing Cylindrical roller bearing and deep groove ball bearing
- Work roll bearing Cylindrical roller bearing and taper roller bearing
- Main motor 850 kw
- Decoiler motor 85 kw * 2 sets
- Double decoiler motor 85 kw
- Recoiler motor 85 kw * 3 sets
- Thickness gauge FAG (Isotope)
- Automatic flatness control BBC (BFI)
- Drive system DC drive (BBC)
- PLC DP 800 (BBC)
- Electric power source 440 V 3 Phase 60 Hz
By from -
By from -
