OEM Factory for Spiral Wound Gasket-CGI to Luxembourg Manufacturers

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
OEM Factory for Spiral Wound Gasket-CGI to Luxembourg Manufacturers Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

dd

Technical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

OEM Factory for
 Spiral Wound Gasket-CGI to Luxembourg Manufacturers detail pictures


Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket

OEM Factory for Spiral Wound Gasket-CGI to Luxembourg Manufacturers, The product will supply to all over the world, such as: , , ,


  • For more info and related products click on the following link: https://mercedessource.com/tech-help/videos/mercedes-automatic-transmission-seal-diagnosis-part-2-new-seals-gaskets-and-o-rings
    In this video Kent will show you the problems he found when resealing the transmission in his own 1986 300SDL. Applies to almost all models form 1968-1995 including late 111, 113, 108, 109 chassis cars all 114 and 115 chassis 220 230 250 250C 280 280C 240D 300D 1968 to 1976, 107 Chassis 350SL 450SL 450SLC 380SL 560SL 1972 to 1989, 116 chassis 350SE 450SE 450SEL 280SE 280SEL 300SD 1973 to 1980, 123 chassis 1977-1985 Models 230 240D 240TD 280E 280CE 300D 300CD 300TD, 126 chassis 380SE/L 300SD 500SE/L 300SDL 420SE/L 300SE/L 560SE/L 380SEC 560SEC 1981-1991, 201 Chassis 190E and 190D 1984 to 1993 and 124 Chassis 260E 300E 300D 300TD 300TE 300CE E320 and E300D 1986 to 1995 and 129 and 140 chassis to 1995.



    SpeedFlex® Track Top Gasket (TTG) is an intumescent cover for the ceiling track providing fire, smoke, and acoustical ratings for head-of-wall joints between gypsum walls and concrete floor slabs. TTG is compatible with all ceiling track and provides an economical method of providing the required seal in rated and non-rated wall construction. Installed on the track prior to installation, the wall is effectively sealed against fire, smoke, and sound transmission during the construction process, thereby providing cost savings. TTG allows up to 100% movement. The red color is easy to identify and easy to inspect, and it is not susceptible to cracking, sagging, or dripping.

    For more information visit www.stifirestop.com


    5 Stars By from -

    5 Stars By from -

    Related Products