High Efficiency Factory PTFE Graphite Braided Packing for Kyrgyzstan Factory
High Efficiency Factory PTFE Graphite Braided Packing for Kyrgyzstan Factory Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
15Mpa |
|
Shaft Speed |
14m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
High Efficiency Factory PTFE Graphite Braided Packing for Kyrgyzstan Factory, The product will supply to all over the world, such as: , , ,
Wrap-N-Seal Tape can be used in almost any application, even under the hood of a vehicle.
Seal electrical connections; Make emergency repairs on hoses and pipes; Seals, waterproofs and insulates; Has a high dialectic strength; Operating temperature range of -85° to 500° Fahrenheit.
https://www.tifco.com
If your car’s A/C is low on refrigerant and blowing hot air, that means the system, by definition, has a leak somewhere. You can add more refrigerant, but that refrigerant won’t last unless you seal the leak.
Super Seal is the fast, easy, inexpensive way to seal small A/C leaks yourself. A single can seals leaks in both the metal and rubber components of the air conditioning system, without the expense of replacing parts.
Using Super Seal is simple:
1. Locate the low-pressure port on your car A/C system. For help in finding the port on your vehicle, visit our online port locator: https://bit.ly/R1npRR
2. Attach the hose to the Super Seal can.
3. Start the engine and set the A/C and fan to maximum.
4. Connect the hose coupler to the low-pressure port.
5. Dispense the can’s contents into the A/C system.
6. Add R-134a refrigerant to recharge the system.
7. Allow the air conditioner to run for 15 minutes to circulate the Super Seal throughout the system.
Have questions? Ask the pro: https://bit.ly/1e8xjep
R-134a Super Seal can be found on the shelves of most auto parts stores. To find the nearest location, type your zip code into our store locator: https://bit.ly/1qgX12n
By from -
By from -
