Super Purchasing for Carbon Fiber Packing Impregnated with PTFE for Grenada Importers
Super Purchasing for Carbon Fiber Packing Impregnated with PTFE for Grenada Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Super Purchasing for Carbon Fiber Packing Impregnated with PTFE for Grenada Importers, The product will supply to all over the world, such as: , , ,
Visit https://www.smartplumbingproducts.com/product/insta-clamp-repair-clamp to learn more.
The Insta-Clamp Repair Clamp provides a quick and easy way to temporarily patch a leaky pipe. Available in 2 sizes, the clamp prevents having to drain the system and eliminates shutdown. Insta-Clamp provides quick seal on all M, L or K copper tubing solder joints and can make a permanent or temporary repair on 45s, 90s, Tees, Couplings and Threaded Adapters. The 60% pipe side of the waffle gasket can also be used for pin hole leaks.
Features and Benefits:
Available in .5″ to 2.5″ and 3″ – 4″ diameters (Insta-Clamp Plus)
Made from 304 Stainless Steel
Unique NBR STEP waffle gasket design
Temp rating: -40o to 2120 F
Pressure Rating: Insta-Clamp ½”-2-1/2″ – 150 psi
Pressure Reating: Insta-Clamp Plus 3.00″-4.00″ – 175 psi
Exact Fit – Simple two piece design
For permanent or temporary repairs
Produced in the USA
By from -
By from -
