Low MOQ for PTFE Filament Braided Packing for Manufacturers
Low MOQ for PTFE Filament Braided Packing for Manufacturers Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
12m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
Low MOQ for PTFE Filament Braided Packing for Manufacturers, The product will supply to all over the world, such as: , , ,
Available to buy at: https://www.tradecounterdirect.com/sea…
Henkel Loctite 55 Pipe Sealing Cord is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations.
Impregnated with paste to give a high pressure seal to your joints. Loctite 55 should be wound a few times around the thread and once the joint has been closed tightly, will withstand pressures in the region of 40 bar.
Use for cold and hot water applications, as well as potable water or gas. Use on copper, steal or plastic pipe systems.
Loctite 55 is resistant to:
Hot and cold drinking water
Hot water
Domestic gas
Natural Gas
Liquefied gas in gaseous state
Gas condensates
Compressed air
Industrial oils (contains silicone oil.)
Not suitable for heating oil or fuels – Use instead Loctite 577.
Complies with EN 751-2 and has DVGW approval. Certifies to ANSI/ NSF Standard 61
By from -
By from -
