2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers
2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
22m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
2017 China New Design PTFE Packing with Aramid Corner for Iceland Manufacturers, The product will supply to all over the world, such as: , , ,
The HART high temperature / high-pressure Union features a flat-face design that allows for easy removal without having to spring piping. Union contains a spiral-wound 304 stainless steel gasket with graphite filler.
Suitable for hot oil, saturated steam, cryogenic fluids, and other process fluids; in high-pressure/high-temp steam trap, valve, pump, and compressor manifold applications.
See how to change out a seal kit, impeller or entire “wet end” of a Wavemaster jet pump on a Hot Springs, Tiger River, Hot Spot, Solana spa or Limelight hot tub.
By from -
By from -