11 Years Factory wholesale NBR O-Ring to British Factory
11 Years Factory wholesale NBR O-Ring to British Factory Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
11 Years Factory wholesale NBR O-Ring to British Factory, The product will supply to all over the world, such as: , , ,
During the late 1950′s and early 1960′s fluoropolymer plastics were used primarily for their non-stick / low coefficient of friction or insulating properties. Primary applications ranged from paint additives to wire insulation, bearing plates, gaskets and even non-stick frying pans. Edlon saw far greater possibilities. It envisioned harnessing the unique properties of fluoropolymers for alleviating customer’s processing problems in the areas of: corrosion-resistance, release characteristics and in high purity applications.
Edlon was the first to develop a fusion welding process capable of joining long-length fluorinated ethylene propylene (FEP). Then it introduced non-stick covers bonded onto paper mill dryer rolls, which eliminated many of the common problems associated with paper production such as picking, sticking and corrosion. Edlon also developed the process of fabricating iso-statically molded pipe and fitting linings from polytetrafluoroethylene (PTFE). Edlon continues to offer innovation after innovation, and now has industrialized processes in a wide number of applications.
Today, Edlon has extensive capacities to process a wide range of fluoropolymers through a huge variety of manufacturing techniques. We are unmatched in our knowledge and abilities to deliver innovative solutions, and in our capabilities to solve our customer’s most challenging problems.
By from -
By from -
