Special Price for PTFE Packing with Aramid Corner to Myanmar Manufacturer
Special Price for PTFE Packing with Aramid Corner to Myanmar Manufacturer Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Special Price for PTFE Packing with Aramid Corner to Myanmar Manufacturer, The product will supply to all over the world, such as: , , ,
https://www.markerbids.com : Check out Mike’s new auction website!
https://www.facebook.com/techpb : Go like our Facebook page!
https://www.techpb.com/ : Go check out our HUGE forum!
Nothing in paintball is more sacred and passionate than lube. Paintball players could give a shit about world peace, famine, wars, talk about the lube, and they are ready to fight.
2 ways to lubricate your gun-
1) What the manual recommends to use
2) everything else
It’s your gun, do what you want! As tech, the difference between a “fixed it for free” and a “$120 Labor Charge” could be what lube you choose to use.
But it’s your gun, do what you want. Personally, I use what the manual recommends, and my guns NEVER have problems.
Good luck!
By from -
By from -
