High quality factory PTFE Graphite Braided Packing for Lahore Factories
High quality factory PTFE Graphite Braided Packing for Lahore Factories Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
High quality factory PTFE Graphite Braided Packing for Lahore Factories, The product will supply to all over the world, such as: , , ,
Sentinel Seal X Joint & Leak Sealer, which is applied externally, is a one component, ready to use, silicone sealant. It can be applied to screwed fittings, compression joints and gaskets to form a water and air tight seal. A well pasted cloth may be bound around burst and leaking pipes to form a temporary repair.
By from -
By from -