Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory, The product will supply to all over the world, such as: , , ,
**How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s More of my How to on SeaDoo below:
Ok! Seadoo GTX Carbon Ring Floating Ring Bellows Drive shaft replace fix leak carbone. OK! Same instructions for all 1997 97 Seadoo (Except XP and HX ) SP SPX GS GSI GSX GTS GTI. Steps: 1. Remove the O-Ring or Half Metal Ring on the Floating Ring. 2. Loosen up the clamps holding bellows and carbon ring. 3. Remove the nuts and bolts for steering and reverse. 4. Remove the 4 nuts or screw for the impeller housing. 5. You can now pull the Imp housing and drive shaft and all… 6. Use the video as a guide.
Check your internal fuel too! See 2 more Seadoo video links below:
1. How to repair Seadoo Beepers: https://youtu.be/pY-G6IX08pU 2. How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s
3. Clogged internal carb fuel filters. It was caused by the gray Tempo Fuel Lines. https://www.youtube.com/watch?v=0WdK7lTj
By from -
By from -
