Factory Cheap Hot Spiral Wound Gasket-R to Egypt Importers

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

echnical Data Sheet

 Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.

Liên hệ : Mr Phong – 0938.174.382

Mail : flexible0204@gmail.com

https://.www.khopnoimem.coo.me

Kính thưa: Quý khách hàng!
Công ty DANDATCO.,LTD Chúng tôi là một doanh nghiệp chuyên sản xuất các thiết bị lưu
chất như : Khớp nối mềm ( Flexible joint) , Khớp giãn nỡ (Expansion Joint),Ống mềm inox (
Flexible Metal Hose ) , Khớp nối mềm cao su ( Flexible Rubber ) và cung cấp Van, phụ kiện
đường ống, … thiết bị được ứng dụng trong các ngành : Cấp thoát nước, xử lý nước thải, khí,
gas, xăng dầu, nồi hơi,thực phẩm, dược phẩm, hoá chất, xi măng, bột giấy, đường, đóng tàu,
thuỷ điện, nhiệt điện, điện lạnh, điều hoà không khí, dệt nhuộm, may mặc, phòng cháy chữa
cháy,…
- Sản phẩm đa dạng về tiêu chuẩn khác nhau như: BS, DIN, JIS, ANSI, ASTM,…sử dụng cho
nhiều lưu chất và áp suất khác nhau từ 5K, 10K, 16K, 20K, 40K,…
- Hiện tại Công ty chúng tôi đã cho ra dòng sản phẩm Ống ruột gà lõi thép ( Flexible Metallic
Conduit ) , với 2 chuẩn loại : bọc nhựa và không bọc nhựa . Với tính năng chống cháy nỗ sản
phẩm Flexible Metallic Conduit dần thay thế cho sản phẩm ống nhựa luồn dây điện hiện nay
trên thị trường và đồng thời chúng tôi cung cấp các phụ kiện đầu nối kèm theo cho sản phẩm
ống ruột gà lõi thép , ống cứng luồn dây điện
- Bên cạnh đó Chúng tôi còn là nhà cung cấp chuyên nghiệp các sản phẩm : Khớp nối mềm cao
su , Ống mềm cao su , Ống mềm thủy lực … của những thương hiệu nổi tiếng : SunFlex ,
Alfagomma , Sel , Yokohama … được nhập khẩu những nước Ý , Mỹ , Nhật và khối EU.
- Chúng tôi DANDAT.FLEX tự tin mang cho Quý Khách hàng một sự tin cậy bằng những
minh chứng khảo sát thực tế tại Nhà máy với cơ sỡ hạ tầng và dây chuyền sản xuất hiện đại nhất
được nhập khẩu từ Mỹ ,Nhật & Thổ Nhĩ Kì . Với hệ thống quản lý và kiểm soát CHẤT
LƯỢNG theo tiêu chuẩn ISO 9001 : 2008 sẽ là một thông điệp mà chúng tôi khẳng định giá trị
DANDAT.FLEX trên thị trường trong nước và ngoài nước.
Chúng tôi rất mong nhận được sự quan tâm, hỗ trợ và hợp tác của Quý khách hàng!
Xin Chân thành cảm ơn Quý Hàng đã tín nhiệm trong thời gian qua .
Trân Trọng.
Nguyễn Vũ Phong

CHECK OUT THE WEBSITE FOR THE NEW TOOL

www.icrimp.com.au

VISIT THE WEBSITE https://www.icrimp.com.au/ AND THE EBAY STORE https://stores.ebay.com.au/icrimpsystems

Worlds first copper & pex plumbing crimp press tool
The new iCrimp tool was designed to press crimp 1/2 and 3/4 copper and also 16-20-25-32 pex fittings. With 5 tons of manual crimping force in your hands you can be assured on every crimp every time. The icrimp tool weighs only 3.8kg and is capable of flame free connections to copper and pex press systems in under 5 seconds. Pressing copper eliminates the time consuming process of soldering and brazing. The icrimp press tool has constant axial pressing force, ensuring you consistent flame free connections all day long.
Key benefits
• All in one Copper and Pex hand multi-crimper
• Easy interchangeable dies, change effortlessly from different sizes and systems
• No batteries or AC power to worry about
• 360 degree head rotation for easy access
• Fully submersible tool for those wet jobs
• Press connections eliminate need for permits, oxy, torch, bottles etc
• Forged jaws press accurately without leaving burns
• Saves time and money on jobs
• Also does 18mm PB pipe
• Perfect for maintenance plumbing with all the different systems used on houses
• Sturdy and rigid construction
• 5 year product warranty

Savings $$$$
The average plumber in Australia spends approx $900 per year on GAS hire, silver solder, flux, map gas and in time/labor with brazing. Not to mention the hassle of carrying the big heavy bottles around on each job. That’s a 5 year cost of $4500. This multi-crimper cuts down your yearly costs, giving you back time and money.
Testing and Calibration
The tool has been tested to over 4000kpa on our approved pex and copper press systems so you can be confident that each join is 100% leak proof. Our multi tool is designed and engineered to be universally used and also eliminates the need to carry different tools for different systems. If you’re a 1 man plumbing business or employ multiple tradesman, you simply can’t do without the new iCrimp Press Tool. This tool will replace most of your old, heavy and expensive equipment and is at the forefront of plumbing industry technology and design.
Each tool is assembled and then individually calibrated at the iCrimp factory in Australia. We then test each tool to ensure it meets our strict quality control guidelines. This ensures that every tool that rolls out is capable of 5 ton of pressing force and is calibrated to Australian plumbing crimp fittings.
New Technology
The cutting edge technology of the iCrimp tool does away with large and expense jaws for each size piping, as used with current battery tool models. Now you simply change the inner working dies for each size tubing that you are working on. It’s that simple ! No need to spend thousands of dollars to get into the crimp market, iCrimp has designed the perfect maintenance / entry level press tool. Enjoy all the financial and business benefits this tool will do for your workplace. Save time and money on a daily basis.

More information on Copper and Pex press crimp systems
Copper
Press-connect joining of copper and copper alloy tube is fast, economical, and, most importantly, it requires no heat or open flame unlike soldering or brazing. The press-connect joining method (sometimes called press-fit) was patented in Europe in the late 1950s and continues to be used successfully there.
Press-connect joining takes advantage of copper’s excellent malleability and its proven increased strength when cold worked. The joints rely on the sealing capability of a special fitting that contains an elastomeric gasket or o-ring seal and the proper use of pressing tools and jaws. Several manufacturers offer full product lines of press-connect fittings, valves and specialty items. Our tool will crimp all watermarked copper press systems sold in Australia.
Kempress
Viega
BPress
Press Plus
and much more

Pex
PEX (or crosslinked polyethylene) is part of a water supply piping system that has several advantages over metal pipe (copper, iron, lead) or rigid plastic pipe (PVC, CPVC, ABS) systems. It is flexible, resistant to scale and chlorine, doesn’t corrode or develop pinholes, is faster to install than metal or rigid plastic, and has fewer connections and fittings.
PEX tubing is made from crosslinked HDPE (high density polyethylene) polymer.
Our tool will crimp a variety of industry standard copper ring pex crimp systems. As an added bonus, the 16mm pex die will also crimp all 18mm Poly Bute (pb) water piping. So if you come across 18mm (1/2′) Buteline or Profit in your work, you can also repair these. There is almost nothing this new tool cant do.
Some systems our tool has been tested on
Auspex
Duopex
Bush Crimp
K1
K2
Profit18
Buteline18
and much more, contact us for a complete pex system compatibility chart.