Original Factory PTFE O RING for Panama Manufacturer
Original Factory PTFE O RING for Panama Manufacturer Detail:
PTFE o-rings are produced with 100% Virgin PTFE or filled PTFE,and fabricated to extremely close tolerances and to the highest industry and military specifications. It is resistant to most chemicals including acids, bases, oils, steam and other chemicals. It is also very tough and abrasive resistant.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.1~2.3 |
| Tensile Strength | Mpa | 15.0 |
| Elongation at Break | % | 150 |
Application Area
- Agricultural, pumps, mining
- Rail and transport use, Wheels
- General engineering applications
- Marine, Shipping, Automotive
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Original Factory PTFE O RING for Panama Manufacturer, The product will supply to all over the world, such as: , , ,
The Hosokawa Micron Powder Characteristics Tester PT-X makes use of state of the art features to identify the characteristics of a wide range of powdered materials. The instrument is capable of determining 11 different characteristics.
Compressibility
Compressibility is the percentage amount of volume loss a substance will sustain when put under pressure. Essentially, it is how much an object can be crushed without being destroyed.
Determining the Compressibility
The compressibility of a material is determined through two tests: the aerated density test, and the tapped density test. The difference between the results of the aerated density test and the tapped density test is the substance’s compressibility. This video explains how the Hosokawa Micron Characteristics Tester PT-X can be used to determine the compressibility of a granulator material.
By from -
By from -
