OEM China High quality Aflas O-Ring for Zurich Factories
OEM China High quality Aflas O-Ring for Zurich Factories Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
| Properties | Units | Typical value |
| Hardness | IRHD | 84 |
| Tensile strength | MPa | 22 |
| Elongation at break | % | 189 |
| Modulus at50% elongation | MPa | 4 |
| Modulus at100% elongation | MPa | 12 |
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications
OEM China High quality Aflas O-Ring for Zurich Factories, The product will supply to all over the world, such as: , , ,
This video shows you how to adjust a HuMa R-10 regulator and how to service it.
Please ensure the regulator has been removed from the rifle before stripping it!
The O rings are:
Small piston O ring – 1.5mm cross section x 5.5mm internal diameter nitrile 70 shore (N70),
Large piston O ring – 1.5mm cross section x 12.5mm internal diameter nitrile 70 shore (N70)
Main body O ring – 2mm cross section x 12mm internal diameter nitrile 70 shore (N70),
Small body O ring – 1.5mm cross section x 9mm internal diameter nitrile 70 shore (N70)
Cap O ring – 1.5mm cross section x 17mm internal diameter nitrile 70 shore (N70),
To purchase a HuMa regulator please visit the eShop on www.xtxair.com
By from -
By from -
