High quality factory PTFE Graphite Braided Packing for Lahore Factories
High quality factory PTFE Graphite Braided Packing for Lahore Factories Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
15Mpa |
15Mpa |
Shaft Speed |
14m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
High quality factory PTFE Graphite Braided Packing for Lahore Factories, The product will supply to all over the world, such as: , , ,
NKG, back to back (shaft seal, MG12-MG1)
Table of contents:
Dismantling:
00:00 Removing the pump housing
02:41 Removing the impeller
04:03 Removing the primary shaft seal
05:15 Removing the secondary shaft seal
Assembly:
06:06 Fitting the secondary shaft seal
08:36 Fitting the primary shaft seal
10:31 Fitting the impeller
11:41 Fitting pump housing
15:04 Wear ring replacement
Recorded: January 2010
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -