Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
O-Ring Sizes for Industrial Applications
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory, The product will supply to all over the world, such as: , , ,
HOW TO REPAIR STUCK SPRINKLER HEADS USING EVERYDAY PETROLIUM JELLY (VASELINE) This is (sometimes) a short term fix (and cheaper) until you can buy a new one, but it does work well on dirty or a high calcified sprinkler and may be a long term fix I have tried all kinds of oils,silicon, and expensive Teflon and this does the best and it is cheap. Best of luck MBJREPORT.
Music made with Magix Premium music maker
By from -
By from -
