12 Years Factory wholesale FEP Encapsulated O-Ring to UK Manufacturer
12 Years Factory wholesale FEP Encapsulated O-Ring to UK Manufacturer Detail:
Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.
Technical Data Sheet
Property |
Unit |
Result |
|||
A |
B |
C |
|||
Normal Conditions |
Hardness |
JIS Hs |
70~90 |
70~90 |
60~75 |
Elongations(min.) |
% |
60 |
60 |
80 |
|
Tensile Stress(min) |
Mpa |
16 |
16 |
16 |
|
Compressibility |
% |
50~60 |
50~60 |
60~75 |
|
Recovery |
% |
>85 |
>85 |
>70 |
|
Permanentset |
% |
<10 |
<10 |
<10 |
|
230°Cx24h hot air ageing |
Change of hardness(max) |
JIS Hs |
-5~+5 |
-5~+5 |
-5~+5 |
Change of Tensile Stress(max) |
% |
-15 |
-15 |
-15 |
|
Change of Elongation(max) |
% |
-20 |
-20 |
-20 |
|
Compression Permanentset |
175°Cx70h |
% |
≤20 |
≤20 |
≤20 |
Color |
|
|
Brown |
Black |
Red |
Applications |
Temperature Limited |
℃ |
-20~+250 |
-20~+200 |
-20~+200 |
Pressure Limited |
Mpa |
0~35 |
|||
Working Environment |
|
Strong Caustics, moderate acids, chlorine, gases, water, steam, hydrocarbons, hydrogen and aluminum fluoride except element fluorine and fusion sodium. |
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
12 Years Factory wholesale FEP Encapsulated O-Ring to UK Manufacturer, The product will supply to all over the world, such as: , , ,
Good Day Dear’s
BWG 1000-CL
Classic & Lovely
All in One
Fully Automatic Multifunctional
Specialty Adhesive Release Coating & Laminating Machine
Function
To produce Specialty Release Coated Adhesive Products for Special Applications
Configuration
1) First time in INDIA & Best in the Coating & Lamination World
2) Automatic COMMA BLADE (BULL – NOSE) TRANSFER COATING station well fitted with Thickness Gauge Meters for best Coating Control & Quick Make Ready and an Auto Glue Pump for Continuous Gluing.
3) Special Designed Tube Heater’s with Auto On/Off of Heating System for Drying makes the drying faster & Specially Designed 2 Phase Energy efficient heaters reduce the Power Cost compare to Indigenous machines.
4) Blower Fans at the Oven Top circulates the air & there by enhance the drying fast and uniform.
5) Side Window Opening Of Oven for Easy Film/Paper Feeding & Efficient Cleaning.
6) Advanced EPC System 2 Nos for Accurate Line Guide for Uniform Edges of Coated Substrates and Uniform Feeding of Laminate’s.
7) Cooling Teflon Rollers for Quality Laminating there by Glue Transfer to the Substrate is ensured.
8) Inline Edge Trimmer’s
9) Banana Roller’s at the rewinding side for wrinkle free rewinding and Air shaft eases the rewinding.
10) As Direct heating involved Care should be taken care of to Prevent Fire & Shrinking of the substrate.
11) Economically designed Structure extends the Machine Life and Comes with 3* Year Warranty.
12) Complete Plant & Machinery Well Fitted in 30’x40’ working hall
13) Well-Equipped with Energy Efficient Motors with Invertor Controls for multifunctional operation
14) Operator Friendly & Only 1 Labour to operate the machine.
Welcome to GuoLian!
Thanks & Regards,
Jean & Prabhu
+91 7871910011 & +86 185 3086 7955
+91 98432 69727 & +86 185 3826 1183 (WhatsApp/Wechat/Viber)
Email : blackandwhitepackagingsolution@gmail.com
Web office: https://guolian668.en.alibaba.com & https://www.indiamart.com/black-white-packaging/
Black & White ~ Basic Colors of Life!
NOTE: rear shaft seal is not covered in this video – this information can be found online. If you have a deep groove worn into the shaft from this seal, you may have to install the new one in a slightly different position to contact an undamaged part of the shaft to prevent leakage from the backside of the pump.
The MB re-seal kit only includes the front cover o-ring and rear shaft seal – if your pump continues to leak from the front cover after replacement of this while operating, the internal O-rings will be leaking. With time and heat they have all gone hard and brittle now anyway.The internal o-rings have to be sourced from the aftermarket. They are not available as a spare part from MB. They want the whole pump replaced in such case.
Also note, i suggest using something like silcon o-ring grease to allow easy installation of the internal o-rings. Oil on its own may allow the rings to bind and be cut, chipped or shaved, resulting in enormous leaks.
By from -
By from -