Reliable Supplier Die Formed Graphite Ring Supply to luzern
Reliable Supplier Die Formed Graphite Ring Supply to luzern Detail:
Die formed graphite packing ring is made of pure flexible graphite ,or Graphite with inconel /SS316/Brass wire reinforced.
Performance and Features
- Perfect self lubricant performance.
- High elasticity coefficiency.
- Scope of Application
Working temperature:~200~400℃(200~800℃ under non-oxidation atmosphere)
Working pressure:≤35MPa
Density:1.4 ~ 1.6 g/cm3
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
Reliable Supplier Die Formed Graphite Ring Supply to luzern, The product will supply to all over the world, such as: , , ,
Re-install the drive shaft and jet pump.
Clean threads inside the bolt holes in the pump base and clean the bolt threads.
Grease the splines on both ends of the drive shaft, and the O-ring seal that fits into the impeller.
Make sure the pump section fully seats aginst the pump base, and the drive shaft fully engages the PTO drive coupler.
As you tighten the bolts, check that the nozzle assembly is square and level, not tilted. Snug the bolts, check for proper pump assembly.
Then torque to 18 ft-lbs in a criss-cross pattern.
By from -
By from -
