Rapid Delivery for PTFE Packing with Aramid Corner for Argentina Factories
Rapid Delivery for PTFE Packing with Aramid Corner for Argentina Factories Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
Rapid Delivery for PTFE Packing with Aramid Corner for Argentina Factories, The product will supply to all over the world, such as: , , ,
CM, CME 1, 3, 5, 10, 15, 25 (cast iron)
Table of contents:
00:00 Dismantling of chamber stack
01:57 Removal of shaft seal
03:20 Fitting of shaft seal and gasket
04:38 Fitting the chamber stack
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
