Quality Inspection for Spiral Wound Gasket-CGI to Melbourne Factories

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Quality Inspection for Spiral Wound Gasket-CGI to Melbourne Factories Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

dd

Technical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

Quality Inspection for
 Spiral Wound Gasket-CGI to Melbourne Factories detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket

Quality Inspection for Spiral Wound Gasket-CGI to Melbourne Factories, The product will supply to all over the world, such as: , , ,


  • In 1919, the Electro Refractories and Alloys Corporation was established in Blasdell, New York. The plant in Blasdell was comprised of six buildings, and in 1949, an abrasives division was added. The company underwent several name changes throughout its history, but among its workforce it is commonly referred to as Ferro Corporation. Ferro manufactured abrasives, refractories, grinding wheels and crucibles used in foundries.

    Up until the late 1970′s, dozens of asbestos-containing materials were utilized at Ferro in the manufacturing process and during maintenance procedures. Block insulation, pipe covering, insulating cement, gaskets, packing and electrical wires contained asbestos. Asbestos was also incorporated into drying trays used during the manufacturing process. Inhaling dust and particles from the application and removal of asbestos-containing materials placed workers at risk for developing mesothelioma or lung cancer.

    Our attorneys live and work in Western New York, and we have a thorough knowledge of the job sites where you were exposed to toxic substances.

    For more information about our firm, please visit www.lipsitzponterio.com.

    Attorney Advertisement – Prior results do not guarantee similar outcome.


    5 Stars By from -

    5 Stars By from -

    Related Products