Professional China PTFE Graphite Braided Packing for Saudi Arabia Factory

Short Description:

It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Professional China PTFE Graphite Braided Packing for Saudi Arabia Factory Detail:

It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

2Mpa

15Mpa

15Mpa

Shaft Speed

14m/s rotary

Temperature

-200℃~+280℃

PH Range

0~14

 Application Area

It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.


Product detail pictures:

Professional China 
 PTFE Graphite Braided Packing for Saudi Arabia Factory detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket

Professional China PTFE Graphite Braided Packing for Saudi Arabia Factory, The product will supply to all over the world, such as: , , ,


  • **How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s More of my How to on SeaDoo below:
    Ok! Seadoo GTX Carbon Ring Floating Ring Bellows Drive shaft replace fix leak carbone. OK! Same instructions for all 1997 97 Seadoo (Except XP and HX ) SP SPX GS GSI GSX GTS GTI. Steps: 1. Remove the O-Ring or Half Metal Ring on the Floating Ring. 2. Loosen up the clamps holding bellows and carbon ring. 3. Remove the nuts and bolts for steering and reverse. 4. Remove the 4 nuts or screw for the impeller housing. 5. You can now pull the Imp housing and drive shaft and all… 6. Use the video as a guide.
    Check your internal fuel too! See 2 more Seadoo video links below:
    1. How to repair Seadoo Beepers: https://youtu.be/pY-G6IX08pU 2. How to repair gas gauge: https://youtu.be/jivVH99ngYw?t=1s
    3. Clogged internal carb fuel filters. It was caused by the gray Tempo Fuel Lines. https://www.youtube.com/watch?v=0WdK7lTj


    5 Stars By from -

    5 Stars By from -

    Related Products