Professional Manufacturer for NBR O-Ring to Anguilla Importers

Short Description:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber. Technical Data Sheet Color Black or Color Material Nitrile(NBR) Hardness(Shore A) 65~75 Temperature(℃) -30~+120 Tensile Strength(Mpa) 14 Elongation at Break(%) 384 Density(g/cm3) 1.2   Application Area Nitrile rubber performs well in carburetor and fuel...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Professional Manufacturer for NBR O-Ring to Anguilla Importers Detail:

Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.

Technical Data Sheet

Color Black or Color
Material Nitrile(NBR)
Hardness(Shore A) 65~75
Temperature(℃) -30~+120
Tensile Strength(Mpa) 14
Elongation at Break(%) 384
Density(g/cm3) 1.2

 

Application Area

Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.


Product detail pictures:

Professional Manufacturer for
 NBR O-Ring to Anguilla Importers detail pictures


Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications

Professional Manufacturer for NBR O-Ring to Anguilla Importers, The product will supply to all over the world, such as: , , ,


  • First, I sanded the cracked area so the epoxy would adhere to the tank better. After applying the epoxy, I let it cure overnight for 12 hours. However, I noticed a spot that I had missed so I applied more quick steel the following morning.

    This is the first time I’ve done this so I’m crossing my fingers hoping it works. I’ve seen other videos where people use soldering irons before applying the epoxy however, I did not take that approach because my tank was full of fuel. I did want to risk catching something on fire.



    Toolguard is a high temperature, extruded silicone that provides protection to the mold and the operator during transportation and handling. Toolguard can be permanently bonded to the mold edge using RTV silicone adhesive. The product is available in two sizes that cover most mold edge thickness.

    For more information, please visit: www.airtechonline.com


    5 Stars By from -

    5 Stars By from -

    Related Products