Special Price for PTFE Packing with Aramid Corner to Slovakia Importers
Special Price for PTFE Packing with Aramid Corner to Slovakia Importers Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Special Price for PTFE Packing with Aramid Corner to Slovakia Importers, The product will supply to all over the world, such as: , , ,
https://www.optibelt.com/en/material-handling.html
Service case PREMIUM for welding optibelt RR, RR Plus and KK
This five-piece service case PREMIUM is suitable for daily use. With its ergonomic and temperature regulated EErgo welding tool, TPE and urethane belts can be welded quite easily at the press of a button. Due to the short warm-up phase, of less than two minutes, the tool is optimised for instant use.
The versatile FZ01 Vario clamps are a perfect complement to the other tools in the welding set. The quick clamping function allows round belts with diameters up to 10 mm and V-belts up to profile 10 to be clamped and welded within a short space of time.
The exchangeable profile jaws also make it possible to process special profiles. The service case PREMIUM also includes a second set of guiding clamps, which are used for round belts with diameters from 8 mm upwards and V-belts with profiles of up to 32.
The set is completed by a pair of shears with an adjustable angled stop that allows both straight and angled cuts, and a side cutter for removing welded seams.
Contents of the service box
GUIDING CLAMPS FZ02/3
for round belts with diameters from 8 mm and V-belt profiles up to 32 (D)
GUIDING CLAMPS FZ01 VARIO
with exchangeable profile jaws, for round belts with diameters of up to 10 mm and V-belt profiles up to 10 (Z)
SHEARS AS04
with adjustable angled stop
WELDING TOOL EERGO
for TPE and PU; under 2 minutes warmup time; temperature regulated welding tool, ergonomic and quick
SIDE CUTTER SE02
for removing the weld seam
By from -
By from -
