Renewable Design for Spiral Wound Gasket-CGI to Danish Factory
Renewable Design for Spiral Wound Gasket-CGI to Danish Factory Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
What Is A PTFE Ring Gasket?
Renewable Design for Spiral Wound Gasket-CGI to Danish Factory, The product will supply to all over the world, such as: , , ,
The 3 X Factor – Three Exclusive Features
V-Seal
Rotex V-SealSelf Energized: Exclusive self energized double lip seal design for superior dynamic sealing. V-Seal operates over a broad range of instrument air pressures. Lower friction and less hysteresis for control applications.
Wear Compensating: V-Seals’ wear compensation feature eliminates the “set” taken by traditional O-rings. Greater temperature range and chemical resistance than O-rings. Actuator seal selection made simple!
Seamless Bearings
Rotex Seamless BearingTop Pinion Bearing: Rotex Infinity has a large solid top bearing to center and align the pinion for years of trouble free service and performance. Traditional “strip” bearings or O-rings offer less surface area and load capacity, reducing the overall life of the actuator.
Seamless Piston Head Bearings: Bearings are large one piece construction to support and guide the pistons under maximum load conditions. Bearings are molded directly to the piston, then machined concentric to the piston, centering the piston more precisely than strip bearings or O-rings possibly could.
Rack Engagement Bearings
Rotex Rack Engagement BearingsCenter Bore Sleeve: Provides the largest single piece bearings surface possible for complete piston rack support.
Internal Rack Guides: Durable guide blocks optimize rack teeth engagement for a lifetime of actuator cycles.
By from -
By from -
