Factory supplied PTFE Graphite Braided Packing to Kenya Manufacturers

It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.

Technical Data Sheet

 Application Area

It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.

Loading of the internal diameter on a press fitting. The design of the tool was made by Camas. Possibility to process 8 different sizes from ø12 up to ø54 mm. The machine is able to process 1 piece every 3 seconds. The machine is completely automatic.

Hinged Pipe Repair Clamp S size 290.0mm to suit the outside diameter pipe of 290mm. The hinged pipe repair clamp by ORBIT COUPLINGS in Australia is manufactured from 316 stainless steel with teflon coated stainless steel bolts. EPDM Sleeve/ Seal rated to 16 Bar / PN16 / 1600 KPa. The hinged repair clamp is an easy and simple to install pipe repair clamp which opens on a hinge, allowing the clamp to fully open and wrap around the pipe that you are wanting to repair. Simply fit the clamp over the crack or hole in the pipe, and tighten the bolts to the torque stated on the pipe clamp. The hinged repair clamp is available in sizes up to 350mm nominal bore. Above size 350mm then we recommend the Double Lock Clamp by ORBIT COUPLINGS.
For more information on pipe couplings and pipe repair clamps in Australia visit https://orbitcouplings.com.au/