Factory supplied PTFE Graphite Braided Packing Supply to Norwegian
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian Detail:
It is a braided packing made of PTFE yarn containing graphite. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self lubrication packing does not score the shaft and minimizes sleeve rep, acement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids( aqua regia, fuming nitric acid, fuming nitric acid, fuming sulfuric acid,etc.) for centrifugal pumps, autoclaes, agitators mixers, etc.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
15Mpa |
|
Shaft Speed |
14m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
It can be used to seal alkalis, solvents, water, steam, for centrifugal pumps, autoclaves, agitators, mixers, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Factory supplied PTFE Graphite Braided Packing Supply to Norwegian, The product will supply to all over the world, such as: , , ,
https://www.sealmaster.com
At Seal Master we take pride in our products and stand by their quality. Each Seal Master product is inspected a minimum of two times prior to shipment by two separate Seal Master Quality inspectors. During this process inspectors are looking for obvious cosmetic defects but are also trained to be aware of other problems that may occur during operation. Below are examples of some inspection processes that take place prior to shipment.
By from -
By from -
