One of Hottest for PTFE Graphite Packing with Aramid Corner to Eindhoven Importers
One of Hottest for PTFE Graphite Packing with Aramid Corner to Eindhoven Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
One of Hottest for PTFE Graphite Packing with Aramid Corner to Eindhoven Importers, The product will supply to all over the world, such as: , , ,
Volsun Cold Shrink End Cap Advantages
☆ Simple and fast installation, no tools required.
☆ Accommodates size ranges from 11.6mm – 84.Volsunm.
☆ Good abrasion resistance.
☆ Seals tight, retains resiliency and pressure even after prolonged years of ageing and exposure.
☆ Water-resistant.
☆ No mastic or tape required.
☆ No torches or heat required.
☆ Resists fungus.
☆ Resists acids and alkalis.
☆ Resists ozone.
☆ Easily removed.
☆ No training required for installation.
More details please see www.shrinkmarket.com
By from -
By from -
