factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer

PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.

Technical Data Sheet

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

Email: AIECO.Edward@gmail.com if you have any questions or would like more information.

The Impulse sealer with Cutter (C series) are all equipped with a sliding blade that cuts excess material a quarter inch from the seal. The Impulse Sealer with Cutters is excellent for sealing poly-tubing and plastic materials. Available in seal widths of 2mm and 5mm. Perfect for applications where roll bags are used.

The 3 X Factor – Three Exclusive Features

V-Seal

Rotex V-SealSelf Energized: Exclusive self energized double lip seal design for superior dynamic sealing. V-Seal operates over a broad range of instrument air pressures. Lower friction and less hysteresis for control applications.

Wear Compensating: V-Seals’ wear compensation feature eliminates the “set” taken by traditional O-rings. Greater temperature range and chemical resistance than O-rings. Actuator seal selection made simple!

Seamless Bearings

Rotex Seamless BearingTop Pinion Bearing: Rotex Infinity has a large solid top bearing to center and align the pinion for years of trouble free service and performance. Traditional “strip” bearings or O-rings offer less surface area and load capacity, reducing the overall life of the actuator.

Seamless Piston Head Bearings: Bearings are large one piece construction to support and guide the pistons under maximum load conditions. Bearings are molded directly to the piston, then machined concentric to the piston, centering the piston more precisely than strip bearings or O-rings possibly could.

Rack Engagement Bearings

Rotex Rack Engagement BearingsCenter Bore Sleeve: Provides the largest single piece bearings surface possible for complete piston rack support.

Internal Rack Guides: Durable guide blocks optimize rack teeth engagement for a lifetime of actuator cycles.