Rapid Delivery for Spiral Wound Gasket-CG to Sierra Leone Manufacturers
Rapid Delivery for Spiral Wound Gasket-CG to Sierra Leone Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket
Rapid Delivery for Spiral Wound Gasket-CG to Sierra Leone Manufacturers, The product will supply to all over the world, such as: , , ,
SIXTEN srl https://www.paginegialle.it/sixten 292, v. Emilia Tel 051 6258101 Fax 051 6258098 Progettazione e commercio di guarnizioni di tenuta per cilindri oleodinamici e pneumatici, raschiatori, anelli di guida, O-Rings, anelli antiestrusione. Guarnizioni per movimenti alternativi per basse ed alte pressioni. Anelli di tenuta alberi rotanti, particolari a disegno. Tutte le tenute vengono prodotte in un ampia gamma di mescole (nitrile, poliuretano, silicone, fpm, epdm, ptfe) al fine di determinare la soluzione ideale per ogni impiego. Questi sono i principali prodotti che la Sixten (sistemi di tenuta) rappresenta e distribuisce, collaborando con aziende qualificate e privilegiando quelle in possesso di certificazione della qualità.
By from -
By from -
