OEM/ODM China PTFE Graphite Packing with Aramid Corner for Auckland Importers
OEM/ODM China PTFE Graphite Packing with Aramid Corner for Auckland Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
OEM/ODM China PTFE Graphite Packing with Aramid Corner for Auckland Importers, The product will supply to all over the world, such as: , , ,
Toolwright 3 is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. Toolwright 3 has a thinner film than Toolwright 5 version and can be more easily applied over complex contour surfaces. Toolwright 3 has high elongation, good tear strength, high temperature resistance and excellent clean up after removal. Note: The color has changed to orange.
Benefits:
• Extend the life of worn tools avoiding cost of new tools.
• Tougher film is more tear resistant, easier and faster to apply.
• Improved part surface quality.
For more information, please visit: www.airtechonline.com
By from -
By from -